A C2C (corp-to-corp) rate card is a staffing vendor's pricing document. It sets the bill rate (what the vendor charges the end client), the pay rate (what the vendor pays your corporation), and the margin, which is the gap between them. The margin is how the vendor gets paid for placing you, and it's the number you almost never get to see.
That's the problem. You see one number, your pay rate, and you're asked to say yes. This page shows how vendors build the other two numbers, what a normal gap looks like, and what to say before you sign, because after you sign the rate is locked.
What is a C2C rate card?
A C2C rate card holds three numbers, and the structure is always the same.
- Bill rate: what the vendor charges the end client. It's usually the highest number, and it's what the client sees on an invoice.
- Pay rate: what the vendor pays your C2C corporation. This is your revenue per hour, or per project on fixed-bid work.
- Margin: bill rate minus pay rate. The vendor keeps it to cover recruiting, compliance, payroll taxes, insurance, infrastructure and profit.
Example: bill rate $85/hour, pay rate $65/hour, margin $20/hour, which is about 24% of the bill rate.
Some vendors and MSPs (Managed Service Providers) run the card as a fixed markup model. They quote clients and assign contractors from it. If you're new to who sits where in the chain, read what a vendor is in C2C staffing first.
Is it a rate card, a bill rate, or a corp-to-corp rate card? Which question are you asking?
Contractors ask this three ways. The underlying answer is the same, but each phrasing points at a different part of the problem.
| The question | What it's really asking | The short answer |
|---|---|---|
| What Is a C2C Rate Card and How Do Vendors Set Bill Rates vs Pay Rates? | How the vendor's pricing contract works and where the margin goes | The card is the vendor's master pricing document. The margin is the vendor's only income from placing you. Rates lock when you sign, so you negotiate before. |
| What Is a C2C Rate Card and How Do Vendors Determine Your Bill Rate vs Pay Rate? | What drives the three numbers for you specifically | Demand, role scarcity, contract length, your track record and the client's budget all move the margin. Leverage pushes it down. |
| What Is a Corp-to-Corp Rate Card and How Do Vendors Set Bill Rates vs Pay Rates? | Is this a standard markup or a per-person deal? | Corp-to-corp and C2C mean the same thing here. Cards are often standardized per role, so the real room is at the offer stage and in the contract terms. |
In short: same document, three angles. The rest of this page covers all of them.
How do vendors set the bill rate?
Vendors start with the client's budget, not with you. They look at what competitors charge, what the client will tolerate and what contractors expect. Then they add their costs: sales, benefits administration, payroll taxes, insurance and bench time (the time you're between gigs).
The bill rate is anchored to the client's ceiling. Say a bank will spend $90/hour at most for a Java backend contractor. The vendor works backward. Subtract a 25% target margin and the pay rate lands at $67.50/hour. You accept it or walk.
Specialized roles, like deep learning engineers or RF validation, command higher bill rates. That sometimes pulls the pay rate up too. Commodity skills, like general QA, get squeezed harder, so vendors tighten labor cost.
How do vendors determine your pay rate and margin?
Margins aren't random. They come from demand, risk and overhead. These are the levers:
- Role scarcity. A hard-to-fill role (IAM engineering, machine learning infrastructure) lifts the bill rate. Some vendors pass part of that to you to close the deal. Others keep it. Vendors differ, so ask.
- Contract duration. A 12-month contract usually pays more than a 3-month one. The vendor gets visibility and less recruiting churn. One pattern: a 12-month deal might sit near 15% margin, while a 3-month contract might sit near 30%.
- Vendor tier. Mega-agencies keep fat margins. Boutique or tech-native vendors often pass 70–80% of the bill rate to you because their overhead is lower.
- Your track record. Repeatable contractors who don't cause churn get better rates. Unknowns carry the vendor's perceived risk.
- Compliance overhead. Contract-to-hire and multi-state work can add extra margin. Ask if you're working across state lines.
- Bill rate size. On a high bill rate ($120+/hour) vendors can afford a thinner margin.
Plain version: the client's budget caps the bill rate, and the vendor's risk and overhead decide how much of it reaches you.
What is a normal margin between bill rate and pay rate?
Most vendors work in a wide band of 15–35%. A healthy, lean margin runs 15–25% of the bill rate. Here is how it breaks down by situation.
| Situation | Typical margin |
|---|---|
| High-demand roles with competing vendors (AI/ML, cloud security, Salesforce) | 10–15%, up to 25% |
| Niche or low-supply roles (a Databricks specialist in a tight market) | 25–35% |
| 12-month contract | Can sit near 15% |
| 3-month contract | Can reach about 30% |
| Standard role, any term | Above 35% is a negotiation opening |
Context matters. A $60 pay rate on an $80 bill rate is a 25% margin. In a high-supply market like Java backend or standard QA, that's normal. In a low-supply market, the same ratio is a red flag. Treat these as ranges, not laws.
Can you negotiate a C2C rate, or is the rate card fixed?
Both are true, and that confuses people. The card itself is often standardized per role. Vendors do this to avoid negotiating one contractor at a time, which means two contractors with identical credentials usually get the same pay rate from the same vendor. But there is room at one moment: before you accept. After you sign, the rate is locked and your leverage drops to near zero.
Leverage that pushes margin down:
- Competing offers from other vendors.
- Prior work for this vendor as a proven performer.
- A long commitment (6+ months).
- Being among the first applicants. Early on, vendors are racing to fill the role and have more margin flexibility.
How do you negotiate your pay rate before signing?
- Line up parallel offers. Get at least two gigs to the final-offer stage. Vendors move faster when they think you'll take the other one.
- Ask for the bill rate. Say: "What is this role billing for?" Some vendors will tell you. If they dodge, that tells you something.
- Research market pay for your role. Sites like Dice publish ranges. Use them as anchors, not ultimatums.
- Anchor high, then move about 10%. If market pay is $70/hour, ask for $77. You'll often land at $74–$75, which beats taking $70.
- Trade length for rate. Most vendors prefer 12 months over 6. Offer the longer term in exchange for a bump.
- Negotiate terms, not only dollars. Extension terms, markup caps if the client extends you, and who owns the client relationship can matter more than a small bump.
- Get the rate guaranteed in writing for the full term. Watch for a 90-day review clause that lets the vendor cut your rate if "scope changes."
The reason this is worth the awkward conversation: a $5/hour bump on a 40-hour week is $10,400 more gross income a year, and it carries into renewals.
What should you say when a vendor won't share the bill rate?
Vendors rarely volunteer it. They say "market rate" or "what we can offer based on scope." Ask these three questions directly:
- What is the scope of work? (Hours per week, duration, skill requirements.)
- Is the bill rate to the client fixed or negotiated? If negotiated, there's room to move.
- What is your margin policy for contractors at this seniority level? Some vendors have a target, like 20% on infra roles.
Then use scripts like these:
"I need context. If the bill rate is $70 and you're offering me $50, that's 28% margin on a standard role. That's high."
"Similar roles in my market show 15–18% margin. Can you move to $62–65?"
"If I sign for 6 months, do we drop the margin to 15%?"
Proof of demand helps too. "I have an offer from another vendor at $72/hour" or "This skill set is billing at $95+ right now" shows the vendor you know the market. They may not match it, but they'll show you if they can move. Vendors expect pushback on margin. If they flinch, you had room.
Need the math behind your target number? Use the C2C rate vs W2 salary formula. If the quote is a daily figure, see day rate vs hourly rate.
What are the red flags in a rate card?
- Bill rate not disclosed. If they refuse to share it, assume a wide margin. Some contracts don't mention the bill rate at all. Ask for a rate card addendum.
- Margin above 35% on a standard role. You're subsidizing their other contracts. Counter hard. A 50%+ gap is almost certainly below-market pay.
- Vague term length. "Ongoing" or "at-will" means they can cut your rate whenever they like. Insist on a minimum term and a rate guarantee.
- Pay rate drops mid-contract. Get guarantees in writing for the full term.
- Profit-share language. "Margin upside" on renewal almost never triggers. Ask for guaranteed pay instead.
- Hidden cost-sharing. Confirm who pays for equipment, software licenses and background checks. They quietly cut your take-home.
- Unpaid bench time. Most vendors don't pay between assignments. Clarify before you sign.
Why do bill rate and pay rate move independently?
They're linked by math but not by policy. A vendor might cut your pay 10% in a tight market without touching the bill rate, absorbing or keeping the difference. Or it might raise the bill rate after a client renews and hold your pay flat.
That's why rate cards exist. They let the vendor tune client and contractor economics separately. Clients shop by bill rate. You should shop by pay rate and terms.
The bill rate also tells you where the market is going. If a bill rate drops for the same role (say $85 to $75), the market is cooling and your leverage weakens, so lock in a contract. If bill rates climb (say $70 to $90), push your pay up in proportion. You're not obligated to accept a 35% margin just because the vendor's dollar margin grew.
Is a higher pay rate always the better offer?
No. Take two offers. One vendor pays $65/hour on a 12-month gig. Another offers $60/hour on a 6-month contract with a rate-review clause. The first looks better, and it is. The second is a trap. You burn weeks finding the next gig and your effective annual income collapses.
Compare offers on term, guarantees, bench policy and cost-sharing, then on the hourly number. For role-level benchmarks, see the live rates in remote C2C SAP FICO contracts. Before any of this, make sure you understand what a C2C contract actually is.
How does application speed change your rate?
Vendors with fat margins often run slower pipelines and over-hire to fill slots. Lean vendors, with margins of 15–20%, usually have tighter hiring gates but better pay, and they move fast. Either way, you need several live conversations to negotiate from strength. One offer means no leverage.
Timing matters as well. Early in a posting's life, vendors have margin flexibility. Once the pile of applicants builds, the card hardens. That's the reason to be among the first in, and it's what GiraffyReach is built for: it spots fresh C2C postings as they go live and applies before the crowd, so you walk into rate conversations with options instead of a single take-it-or-leave-it number.
Key takeaway
A rate card is the vendor's profit model made visible. Know all three numbers (bill rate, pay rate, margin) before you sign. Typical margins run 15–35% depending on role demand and contract length. Above 35% on a standard role is an opening to negotiate. Transparency is leverage. Opacity is a red flag.